If you are skilled at handling tools and are used to doing things yourself, it is easy to install a composite fence. The installation guide the maker of your fence set out is the best way to install a plastic-wood fence. You will enjoy the benefits when you install the fence. A plastic-wood fence will add beauty to your yard. You will get a fence that will last longer. You won’t need to change the fence. It requires low maintenance. You don’t have to spend a lot of money to maintain the fence. When a fence is installed correctly, you will use it for a long time.
Types of fence panels
There are different types of fence panels. They have their own instructions on how to install them. A professional can build a fence. If you know how to get things done, you can do it yourself. Most suppliers have installers working with them so it’s easy to hire a professional. You can get a cheap fencing panel from your maker. The write-up focuses on how to build your own fence.
Step one
Measure the length and breadth of your yard by mapping out the spot. If you want to get a better result, you should draw a rough sketch of the fence on paper. You have to know the terrain of the place. If there are slopes or high grounds in your yard, and if your fence will be installed on them, the topography is important.
Step two
If you have mapped the spot, you can clear it and make sure it’s ready for the next step. Pegs and ropes should be used to measure a straight line. The corners should be noted. The second step is to dig holes for the posts. Water pipes or any other underground structural facility are not below the fence before you dig the holes. You should get a permit for the fence without delay.
Step three
When you are set, you should dig 20′′ holes in the spots that you have marked. The posts have holes in them. Your fence will have a solid foundation if they are deep. You should set the posts in the center of the holes after digging them. Determine the height of the fence at the stage. The fence’s height depends on your needs. A small fence can be built if you need a partition. If you need complete privacy, you can build a high fence. The fence should be at least 75′′ high. If the posts are set and straight to other posts, then you should cover them with cement. You need to be certain that the posts are straight so that you don’t have a fence that is not straight. The mortal will dry if you wait for 24 hours.
Step four
Measure from the ground and attach the lower brackets to the posts. Attach the brackets to the rail. If you want to fix the bottom rail, make sure you slide it on both sides. You should use screws to fix the rail when you are done.
Step five
The next step is attaching the fencing panels to the post. The panel needs to be fixed to the rail and post. The panels should interlock. You can repeat the process for all the posts. The fence is ready when you are done. You should clean up the surroundings. It is not different from installing a wood fence when it comes to how to install a fence.The steps are explained in this write-up.
Read more: Is building a fence worth it?
Read more: Do I need to maintain my fencing?
