Depending on the type of deck you want to install, you can either nail or screw it. There are a lot of materials that you can use. You can use wood. There are both wood and vinyl decks. There is a method of installation for each material. Some do not need screws or nails. We will look at the various boards available to know which need nails or screws. 

Method of installation 

The method of installing a deck determines if you will nail or screw it. The traditional decking material is wood, and it has been used by homeowners for a long time. Installation of the wood deck is straightforward. You have to build something. You should put the wood deck boards on the frame after building the joists. But, you should put the wood deck from one side of the house to the other side.

The boards of the wood deck are pinned to the joists with nails or screws. If you want to fix the boards to the frame, you can use nails or screws. You should not use nails to fix your deck. You don’t want to split the boards in the nail process. 

Pre-drilling the deck before you screw it will make sure you don’t break it. There are other materials that are good for building a deck. 

Is the installation similar to a wood deck? 

How you install your deck boards is similar to how you install wood decks. You need to clear the area where you will install the deck. Chemicals should be used to treat the spot so that the grass won’t grow underneath the deck. If you are building a flush deck, this is important. You should start building the frame after you have prepared the area. 

The treated timber should be used for the joists. The first thing you should do is arrange your deck boards. Start from the side of your home. You should use screws or clips to fix your boards. We don’t recommend using nails on your deck. You should use screws or clips to install your deck. It is important to note that the situation is not the same with wood. 

Two types of deck

They are not grooved. You don’t have to use screws when installing grooves in the deck. You can only use screws on the ungrooved deck. If you want to install ungrooved decking, you need to pre-drill it. You don’t want to split your deck. If you are installing a new deck, you will need clips and screws. The first set of boards should be installed with starter clips. You can install the other boards with intermediate clips after you clipped the boards. The use of screws is not the best idea since you don’t need nails for the deck. 

Installation of vinyl deck boards  

The installation of vinyl deck boards is similar to the installation of composite decks. You can install your deck with screws or clips. Pre-drilling your vinyl deck will make sure that you don’t split the boards. It’s not the best idea to use nails or screws on your deck because of the rough surface that they create. The top of the nails or screws on the surface of your deck will be visible when you walk on it. Homeowners don’t like that and want a smooth surface for their deck. This is where the deck comes in. After you have installed the decking boards, clips and fastenings are used to ensure a smooth surface.


Should you nail or screw the boards? It depends on the kind of deck you want to install. You don’t have to nail the boards if you are installing them. You can use screws or clips to fix the boards.

Read more: Can I build a pergola in Sweden?

Read more: What is the best low-maintenance deck?

Show CommentsClose Comments

Leave a comment