Composite decking stains: oil, food, rust, paint and building dust

Food, oil and everyday products #

Blot fresh grease rather than spreading it. Use the approved cleaner and rinse thoroughly; repeat gently if permitted. Sunscreen, insect repellents and some rubber products can affect finishes, so avoid direct application over boards. A barbecue needs the clearances and protective arrangement specified by its manufacturer and the decking supplier.

[2]

Rust and metal contamination #

Metal furniture, tools, fertiliser and grinding dust can leave rust-coloured marks. Remove the source as well as treating the surface. A rust remover suitable for stone may damage composite or nearby metal. Ask for an approved product and protect adjacent finishes. Do not attack the area with steel wool.

Paint, cement and construction residues #

Prevent contamination during building work with clean, suitable temporary protection that does not trap heat or grit. Lift loose dry dust carefully without grinding it in. Cementitious residues, paint and adhesive need prompt specialist advice; water or solvent can make some contamination harder to remove. Never assume paint stripper is compatible.

Escalate with useful evidence #

Record the substance, exposure time, photographs and every cleaner already used. Keep labels and product batch information. Follow the applicable warranty's reporting and cleaning requirements without assuming a generic deadline. If one careful approved treatment fails, ask for guidance before repeated chemical applications enlarge the damaged area.

Product instructions come first #

Identify the manufacturer, collection, capped or uncapped surface and installation date before choosing a treatment. A method suitable for one composite can damage another. Start with loose-dirt removal, then a small test using the permitted cleaner and a soft non-metal brush. Rinse thoroughly and assess when completely dry. Follow the product's dilution, contact time and care instructions; never mix cleaning chemicals. Restrict access while the surface is wet or unsafe.

[2]

Green Plank product support #

For Green Plank decking, fencing or cladding, request the current care instructions for your exact profile and finish. The Green Plank links below are commercial documentation resources. These guides provide general care advice, not a product certification or a decision on any individual warranty claim.

[1]

Practical inspection checklist

Common questions