At a glance
Colour and surface temperature should be considered together, but visual colour alone does not provide a complete thermal specification. Pigment choices need evaluation in the finished WPC system.
Key points
- Two surfaces that appear similar can respond differently to incident radiation.
- Prepare representative samples and record the exposure conditions, instrument and measurement location.
- For barefoot or seating applications, treat heat as a project-level usability issue.
Technical context #
Two surfaces that appear similar can respond differently to incident radiation. Geometry, exposure, wind and the supporting arrangement also affect measured temperatures. A marketing label such as cool colour needs a defined comparison and test condition.
What to measure and document #
Prepare representative samples and record the exposure conditions, instrument and measurement location. Compare surfaces simultaneously where possible. Report the actual temperature observations and uncertainty rather than claiming a universal comfort advantage from one test.
Implications for development and specification #
For barefoot or seating applications, treat heat as a project-level usability issue. Shade and access arrangements may matter alongside material choice. Do not promise that a pigment makes a surface safe to touch under every summer condition.
Related reading and evidence limits #
Research on co-extruded coatings for composite durability. Use the linked work as related reading. The practical checks above are editorial recommendations, not reported test results or a substitute for product qualification.
Evidence checklist for pigment selection and solar heating of composites
| Review step | Evidence to retain |
|---|---|
| Material and geometry | Exact specimen or product identity |
| Verification | Method, conditions and individual observations |
| Decision | Approved scope and documented limitations |
Common questions
What evidence is needed for pigment selection and solar heating of composites?
Prepare representative samples and record the exposure conditions, instrument and measurement location. Compare surfaces simultaneously where possible. Report the actual temperature observations and uncertainty rather than claiming a universal comfort advantage from one test.
Question permalink ↗Sources & further reading
- Co-extruded coatings for WPC durability ↗USDA Forest Service · web · 2026-10-14
Cite this page
NFC & WPC Knowledge Reference. “Pigment selection and solar heating of composites” Version 1. Updated 2026-10-15. https://woodplasticcomposite.net/guides/pigment-selection-and-solar-heating-of-composites/
Review & revision
AI-assisted English editorial draft. Human technical review has not been recorded.. Prepared with AI assistance. Editorial policy.
New focused technical draft; not a product certification or production recipe. General material information is not product certification.
Reader discussion
Ask a material question or suggest a correction. Comments require sign-in and editorial approval.
Read or submit comments ↗