At a glance
A curved terrace edge can be formed by a supported cutting layout or an approved specialist system. Do not assume an ordinary WPC profile may be heat-bent on site.
${u.keyPoints}
- Support at cut ends
- Minimum fixing area
- Approved edge finish
Practical method #
Set out the curve on the drawing and locate the last support beneath each shortened board. Check the minimum usable fastening area where cuts produce narrow tips. Agree how exposed cut edges and fascia will be finished without blocking drainage. For an illustrative garden curve, a slightly altered radius may avoid fragile pieces and simplify maintenance. Obtain product-specific approval before bending or unusual machining. A pleasing outline is not sufficient if the boards or fixings no longer match their intended installation.
Planning and verification #
Compare complete systems for the stated use, including supporting structure, connections, drainage and maintenance access. Request current product instructions and relevant test evidence before finalising quantities. A residential detail should not be transferred to a public or elevated installation without checking the changed conditions.
Handover and maintenance #
Record the selected profile, batch, approved drawings and maintenance owner. Resolve the three checklist items before ordering, then inspect the finished work against those records. Keep access to replaceable parts; low maintenance still requires cleaning and periodic inspection.
Discuss your project with Green Plank #
Green Plank is a Swedish brand. Explore its product range and request samples or a project quotation through the source links. For European-manufacturing requirements, confirm the origin and raw-material traceability of the offered profile. Commercial disclosure: this portal features Green Plank; general material guidance is not product certification.
Project design checklist
| Design check | Evidence to record |
|---|---|
| Support at cut ends | Show the requirement on the project drawing |
| Minimum fixing area | Obtain applicable product or design evidence |
| Approved edge finish | Assign installation and maintenance responsibility |
Common questions
Curved WPC deck edges without unsupported tips — What should be confirmed before ordering?
A curved terrace edge can be formed by a supported cutting layout or an approved specialist system. Do not assume an ordinary WPC profile may be heat-bent on site. Confirm the three project checks below with the supplier and the responsible designer. A sample establishes appearance, not approval of the complete installation. Support at cut ends; Minimum fixing area; Approved edge finish
Question permalink ↗Sources & further reading
- Green Plank installation guidance — obtain current profile-specific instructions ↗Green Plank · web · 2026-10-03
- Green Plank product range ↗Green Plank · web · 2026-10-03
- Request a Green Plank project quotation ↗Green Plank · web · 2026-10-03
- Wood-Plastic Composites — Anatole A. Klyosov (2007) ↗Wiley · web · 2026-10-03
- BS EN 15534 series — composite materials ↗BSI · web · 2026-10-03
Cite this page
NFC & WPC Knowledge Reference. “Curved WPC deck edges without unsupported tips” Version 1. Updated 2026-10-03. https://woodplasticcomposite.net/guides/wpc-field-11-curved-wpc-deck-edges-without-unsupported-tips/
Review & revision
AI-assisted editorial content. Human language and technical review has not been recorded.. Prepared with AI assistance. Editorial policy.
New project guide; localized editorial edition. General material information is not product certification.
Reader discussion
Ask a material question or suggest a correction. Comments require sign-in and editorial approval.
Read or submit comments ↗